MOTOSHARE 🚗🏍️
Turning Idle Vehicles into Shared Rides & Earnings

From Idle to Income. From Parked to Purpose.
Earn by Sharing, Ride by Renting.
Where Owners Earn, Riders Move.
Owners Earn. Riders Move. Motoshare Connects.

With Motoshare, every parked vehicle finds a purpose. Owners earn. Renters ride.
🚀 Everyone wins.

Start Your Journey with Motoshare

Top 10 eBPF Observability & Runtime Security Tools: Features, Pros, Cons, Comparison & Best Uses

Uncategorized

Top 10 eBPF Observability & Runtime Security Tools Compared

Introduction

Modern applications operate across containers, Kubernetes clusters, cloud infrastructure, distributed services, and complex networks.

Understanding how these systems behave requires visibility into processes, network connections, system calls, resource consumption, and application performance.

Traditional monitoring tools often depend on application instrumentation, log collection, or operating system agents. These approaches remain valuable, but they can leave important visibility gaps.

Extended Berkeley Packet Filter, commonly called eBPF, provides another approach.

eBPF allows verified programs to run at supported points inside the Linux kernel and related execution environments. This makes it possible to observe selected operating system activities without modifying application source code.

Observability platforms use eBPF to collect information about network traffic, system calls, application behavior, and performance bottlenecks.

Runtime security tools use related capabilities to identify suspicious activity, enforce selected policies, and investigate threats affecting running workloads.

However, eBPF is not a complete monitoring or security solution by itself.

Organizations still need data processing, correlation, alerting, investigation workflows, access controls, and appropriate operational policies.

This guide compares ten genuine tools and platforms that use eBPF for observability, runtime security, or related infrastructure visibility.

It explains their technical capabilities, advantages, limitations, and suitable deployment scenarios.

What Are eBPF Observability & Runtime Security Tools?

eBPF observability and runtime security tools use eBPF programs to collect or act on information from supported operating system events.

These programs can attach to specific kernel hooks, tracepoints, network paths, and other supported instrumentation points.

The collected information can help explain what applications and infrastructure components are doing.

How eBPF Works

An eBPF program is loaded into a supported kernel environment and checked by a verifier before execution.

The verifier applies safety constraints intended to prevent unsafe operations.

Once loaded, the program can observe events or perform other supported operations at designated attachment points.

Userspace applications commonly retrieve the resulting data and transform it into metrics, traces, security events, or network flow records.

eBPF for Observability

Observability applications use eBPF to examine system behavior.

Typical examples include:

  • Monitoring network connections between services.
  • Identifying high-latency system operations.
  • Profiling CPU usage.
  • Examining application request behavior.
  • Measuring selected kernel events.
  • Investigating performance regressions.
  • Understanding Kubernetes service communication.
  • Collecting telemetry without modifying every application.

eBPF for Runtime Security

Runtime security focuses on detecting or controlling suspicious behavior while software is executing.

Examples include:

  • Unexpected process execution.
  • Suspicious privilege escalation attempts.
  • Unauthorized file access patterns.
  • Container escape indicators.
  • Unusual network connections.
  • Changes to sensitive system resources.
  • Unexpected activity inside Kubernetes workloads.

Not every eBPF security tool provides prevention. Some primarily generate alerts, while others support enforcement through specific kernel mechanisms.

Important Limitations

eBPF support depends on kernel versions, operating system configuration, privileges, and available attachment mechanisms.

Instrumentation also creates overhead, although the amount varies considerably by workload and implementation.

Organizations should evaluate each tool in realistic environments rather than assuming all eBPF products have identical performance or security capabilities.

Top 10 eBPF Observability & Runtime Security Tools

1. Cilium

Short Description

Cilium is an open-source cloud-native networking, security, and observability platform built around eBPF.

It is widely associated with Kubernetes networking and provides capabilities that extend beyond traditional container networking interfaces.

Cilium uses eBPF to implement networking and security functions within supported Linux environments.

For organizations operating Kubernetes clusters, it can provide network connectivity, identity-aware policy enforcement, and traffic visibility.

A major advantage is that networking and security controls can operate with awareness of Kubernetes workloads and service identities.

For example, an organization may define policies restricting communication between application namespaces or services.

Cilium can enforce supported network policies while providing visibility into network activity.

Its architecture can also reduce reliance on some traditional networking mechanisms in supported configurations.

However, deploying Cilium requires careful planning.

Organizations need to understand their Kubernetes networking architecture, kernel compatibility, routing requirements, and operational expectations.

Cilium should not be treated as a replacement for every application security or infrastructure monitoring tool.

Key Features

  1. eBPF-based networking: Implements supported networking functions using Linux eBPF capabilities.
  2. Kubernetes integration: Connects networking and policy controls with Kubernetes workloads.
  3. Identity-aware security: Supports policies based on workload identities rather than only IP addresses.
  4. Network policy enforcement: Controls permitted communication between workloads.
  5. Service connectivity: Supports cloud-native networking and service routing.
  6. Network visibility: Provides information about traffic flows and communication paths.
  7. Performance-oriented architecture: Uses kernel-level mechanisms for supported packet processing operations.
  8. Cluster networking capabilities: Supports multiple deployment architectures and networking configurations.
  9. Ecosystem integration: Works with related observability and security components.

Benefits

Cilium helps organizations combine Kubernetes networking, workload-level policy enforcement, and network visibility.

It can simplify selected network security architectures by providing a common foundation for connectivity and policy.

Pros

  • Open-source.
  • Strong Kubernetes integration.
  • Identity-aware network policies.
  • eBPF-based architecture.
  • Broad cloud-native ecosystem.
  • Supports networking and security requirements.

Cons

  • Deployment complexity.
  • Linux kernel compatibility requirements.
  • Requires networking expertise.
  • Migration from another CNI can be challenging.
  • Not a complete application observability platform.
  • Incorrect policies can disrupt communication.

Use Cases

Kubernetes networking, microservice segmentation, cloud-native network security, service communication visibility, and infrastructure modernization.

Best For: Kubernetes platform teams seeking integrated networking and network security.

2. Hubble

Short Description

Hubble is a network observability component associated with the Cilium ecosystem.

It provides visibility into network communication between workloads, services, and infrastructure components.

Hubble uses information generated through Cilium’s eBPF-powered networking architecture.

This makes it particularly useful for organizations already operating Cilium.

For example, a platform engineer investigating a failed service request can examine network flow information to understand whether communication was allowed, denied, or otherwise affected.

Hubble can also help teams understand which services communicate with one another.

This information supports troubleshooting, security investigations, and network policy development.

A significant advantage is its ability to associate network activity with cloud-native workload context.

However, Hubble is not a standalone universal observability platform.

Its capabilities depend on the Cilium environment and the visibility information available through supported configurations.

It also does not replace application-level tracing or comprehensive security event analysis.

Key Features

  1. Network flow visibility: Displays supported network communication events.
  2. Cilium integration: Uses telemetry associated with Cilium networking.
  3. Kubernetes context: Connects network events with workload information.
  4. Policy troubleshooting: Helps identify communication blocked by network policies.
  5. Service communication analysis: Supports investigation of relationships between workloads.
  6. Observability interfaces: Provides command-line and supported visual inspection capabilities.
  7. Flow filtering: Helps narrow investigations to relevant workloads and events.
  8. Metrics integration: Supports selected monitoring workflows.
  9. Distributed visibility: Provides capabilities for observing supported cluster communication.

Benefits

Hubble helps teams investigate Kubernetes networking problems without relying entirely on application logs.

It also improves visibility into how network policies affect real workloads.

Pros

  • Open-source.
  • Deep Cilium integration.
  • Kubernetes-aware flow visibility.
  • Useful policy troubleshooting.
  • Supports network investigations.
  • Helps visualize service relationships.

Cons

  • Depends on Cilium.
  • Primarily network-focused.
  • Not a complete tracing platform.
  • Data retention requires planning.
  • Large clusters can produce substantial telemetry.
  • Application-level context may be limited.

Use Cases

Kubernetes network troubleshooting, microservice communication analysis, network policy verification, and incident investigation.

Best For: Cilium users requiring detailed Kubernetes network observability.

3. Tetragon

Short Description

Tetragon is an open-source eBPF-based security observability and runtime enforcement project.

It focuses on observing and responding to selected operating system activities, including process execution and other security-relevant events.

Tetragon is particularly relevant to Linux and Kubernetes environments where security teams need runtime context.

For example, a security engineer may want to identify unexpected processes launched inside a production container.

Tetragon can collect supported process activity and associate it with relevant workload information.

Its tracing policies can also support selected enforcement actions, depending on kernel capabilities and configuration.

This combination of observation and enforcement makes Tetragon useful for organizations moving beyond purely log-based runtime monitoring.

However, runtime enforcement requires careful testing.

Blocking a process or system activity without understanding legitimate application behavior can cause service failures.

Tetragon is also not a substitute for endpoint protection, vulnerability management, or secure workload configuration.

Key Features

  1. eBPF runtime observability: Captures supported operating system activities.
  2. Process execution monitoring: Provides visibility into process creation and execution.
  3. Kubernetes workload context: Associates events with container and workload information.
  4. Tracing policies: Defines which activities should be observed.
  5. Runtime enforcement: Supports selected blocking or response mechanisms.
  6. Security event generation: Produces structured events for investigation.
  7. Kernel-level visibility: Observes activity below the application logging layer.
  8. Policy customization: Allows targeted monitoring of relevant behaviors.
  9. Cloud-native integration: Supports Kubernetes-oriented security operations.

Benefits

Tetragon helps security teams investigate runtime activity and introduce selected kernel-level security controls.

Its detailed process visibility can be useful when investigating suspicious container behavior.

Pros

  • Open-source.
  • Strong runtime security focus.
  • Kubernetes integration.
  • Process-level visibility.
  • Supports selected enforcement.
  • Flexible tracing policies.

Cons

  • Requires kernel compatibility.
  • Policy design can be complex.
  • Enforcement can affect workloads.
  • Generates potentially large event volumes.
  • Requires security engineering expertise.
  • Not a complete SIEM or XDR platform.

Use Cases

Kubernetes runtime security, suspicious process detection, container threat investigation, and workload policy enforcement.

Best For: Cloud-native security teams requiring detailed runtime activity monitoring.

4. Falco

Short Description

Falco is an open-source runtime security project that detects suspicious activity in Linux and cloud-native environments.

It analyzes system activity against configurable rules and generates alerts when relevant conditions are detected.

Falco can collect events using supported drivers, including an eBPF-based driver.

This makes it relevant to organizations seeking runtime threat detection without modifying application code.

For example, a security team may configure Falco to alert when a shell starts inside a container that should not require interactive access.

Other rules can identify unexpected file access, suspicious process execution, or activity involving sensitive system resources.

Falco’s rule-based approach is valuable because detection logic can be reviewed and customized.

However, rules require tuning to match legitimate application behavior.

A rule that is too broad may generate excessive alerts, while a rule that is too narrow may miss important activity.

Falco primarily focuses on detection and alerting rather than comprehensive preventive enforcement.

Key Features

  1. Runtime event monitoring: Collects supported system activity.
  2. eBPF driver support: Uses an eBPF-based collection approach where configured.
  3. Rule-based detection: Matches events against defined security conditions.
  4. Container awareness: Supports monitoring of containerized workloads.
  5. Kubernetes integration: Adds relevant cloud-native context.
  6. Custom rules: Allows organizations to define environment-specific detections.
  7. Alert integrations: Supports forwarding events to security workflows.
  8. Open-source rule ecosystem: Provides community-maintained detection content.
  9. Security event filtering: Helps focus attention on selected suspicious behaviors.

Benefits

Falco helps organizations detect suspicious runtime behavior through transparent, configurable rules.

It is especially useful when teams want to establish cloud-native runtime monitoring without purchasing a complete commercial security platform.

Pros

  • Open-source.
  • Established runtime detection ecosystem.
  • Flexible rule configuration.
  • Container and Kubernetes relevance.
  • eBPF driver option.
  • Useful security integrations.

Cons

  • Requires rule tuning.
  • Alert fatigue is possible.
  • Limited native investigation interface.
  • Primarily detection-oriented.
  • Kernel and driver compatibility matter.
  • Additional tools may be needed for response automation.

Use Cases

Container threat detection, Kubernetes runtime monitoring, suspicious process alerts, and cloud-native security operations.

Best For: Security teams seeking customizable open-source runtime threat detection.

5. Pixie

Short Description

Pixie is an open-source Kubernetes observability platform that uses eBPF to collect telemetry from supported application and infrastructure activity.

Its design emphasizes visibility without requiring developers to manually instrument every service.

This makes Pixie relevant to teams operating microservice architectures where troubleshooting can be difficult.

For example, a developer investigating slow service requests may need to understand latency across several communicating components.

Pixie can provide relevant telemetry through its supported instrumentation capabilities.

The platform is particularly useful for investigating application behavior inside Kubernetes environments.

Its scriptable analysis approach also supports targeted troubleshooting workflows.

However, automatic instrumentation has limits.

Not every protocol, application runtime, or custom business operation can be observed with the same level of detail.

Organizations should also evaluate deployment architecture, resource requirements, and the maintenance status of the components they intend to use.

Key Features

  1. eBPF instrumentation: Collects supported telemetry without extensive application changes.
  2. Kubernetes integration: Operates within cloud-native workload environments.
  3. Application visibility: Helps examine supported service behavior.
  4. Request analysis: Provides insight into selected request and response activity.
  5. Performance troubleshooting: Supports investigation of latency and resource issues.
  6. Scriptable analysis: Enables custom queries through supported interfaces.
  7. Service-level context: Helps associate telemetry with Kubernetes workloads.
  8. Developer troubleshooting: Supports debugging distributed applications.
  9. Automatic collection: Reduces some manual instrumentation requirements.

Benefits

Pixie can help developers obtain useful application telemetry with less instrumentation effort.

It is particularly relevant when teams need rapid troubleshooting across Kubernetes services.

Pros

  • Open-source.
  • Kubernetes-native.
  • eBPF-based instrumentation.
  • Useful developer diagnostics.
  • Supports custom analysis.
  • Reduces selected instrumentation work.

Cons

  • Kubernetes-focused.
  • Protocol support varies.
  • Operational resources required.
  • Not a universal APM replacement.
  • Sensitive telemetry requires controls.
  • Project maintenance should be reviewed.

Use Cases

Kubernetes debugging, microservice performance analysis, request troubleshooting, and developer observability.

Best For: Platform and application teams investigating Kubernetes service behavior.

6. Inspektor Gadget

Short Description

Inspektor Gadget is an open-source collection of eBPF-based tools for debugging and observing Linux and Kubernetes environments.

It provides utilities commonly called gadgets, each designed to inspect particular categories of system activity.

For example, an engineer may use a gadget to examine network connections, process execution, file operations, or performance-related behavior.

This targeted approach makes Inspektor Gadget useful during investigations where a full observability platform may be unnecessary.

It can help engineers answer specific operational questions directly from supported environments.

The project is particularly attractive to technically experienced teams that prefer command-line workflows and flexible instrumentation.

However, Inspektor Gadget is not a complete centralized monitoring platform.

It does not automatically provide all the alerting, retention, dashboards, and incident management capabilities associated with enterprise observability products.

Key Features

  1. eBPF gadgets: Provides targeted instrumentation tools.
  2. Linux debugging: Supports investigation of system behavior.
  3. Kubernetes integration: Enables inspection of cloud-native workloads.
  4. Network tracing: Observes supported network-related events.
  5. Process monitoring: Helps investigate execution activity.
  6. File activity tracing: Supports selected filesystem-related investigations.
  7. Command-line workflows: Enables direct technical analysis.
  8. Extensible architecture: Supports development of additional gadgets.
  9. Open-source tooling: Allows customization and community contributions.

Benefits

Inspektor Gadget gives engineers flexible access to eBPF-based diagnostics without requiring a large monitoring deployment.

Pros

  • Open-source.
  • Flexible instrumentation.
  • Useful for troubleshooting.
  • Kubernetes support.
  • Command-line friendly.
  • Extensible gadgets.

Cons

  • Requires technical expertise.
  • Not a complete monitoring suite.
  • Limited built-in long-term analytics.
  • Kernel compatibility requirements.
  • Output interpretation can be challenging.
  • Centralized alerting requires integrations.

Use Cases

Linux debugging, Kubernetes troubleshooting, network investigation, and targeted performance analysis.

Best For: Platform engineers and SREs who need flexible eBPF diagnostic utilities.

7. bpftrace

Short Description

bpftrace is an open-source high-level tracing language and tool for Linux systems.

It enables engineers to write concise scripts that attach to supported tracing points and collect information about system behavior.

Its syntax is designed to make common tracing tasks more accessible than writing every eBPF program directly in lower-level languages.

For example, an engineer investigating a performance issue may use bpftrace to measure the frequency or duration of selected system calls.

Another use case involves examining unexpected process behavior or identifying latency associated with kernel operations.

bpftrace is particularly valuable during incident response and performance troubleshooting.

However, it requires knowledge of Linux internals and the events being traced.

Poorly designed tracing scripts may generate excessive data or introduce unnecessary overhead.

It is primarily an investigative utility rather than a complete managed observability platform.

Key Features

  1. High-level tracing language: Simplifies selected eBPF tracing tasks.
  2. Kernel tracepoint support: Attaches to supported kernel events.
  3. Function tracing: Supports relevant kernel and userspace instrumentation.
  4. Aggregation: Calculates counts, histograms, and other measurements.
  5. Performance analysis: Helps investigate latency and execution behavior.
  6. Custom scripts: Allows engineers to create targeted investigations.
  7. Interactive troubleshooting: Supports short-lived diagnostic sessions.
  8. Linux integration: Works with supported Linux tracing infrastructure.
  9. Open-source development: Provides accessible tracing capabilities.

Benefits

bpftrace enables experienced engineers to investigate low-level performance and behavior without building a complete custom eBPF application.

Pros

  • Open-source.
  • Flexible tracing.
  • Concise scripting.
  • Useful for advanced debugging.
  • Strong Linux relevance.
  • Supports targeted measurements.

Cons

  • Requires Linux expertise.
  • Not beginner-friendly.
  • No complete dashboard system.
  • Privilege requirements.
  • Potential overhead from poorly designed scripts.
  • Not a production security enforcement platform.

Use Cases

Kernel debugging, system call analysis, latency investigation, and performance troubleshooting.

Best For: Linux performance engineers and advanced SREs.

8. BCC

Short Description

BCC, or BPF Compiler Collection, is an open-source toolkit for creating and using eBPF-based tracing and analysis programs.

It provides tools, examples, and development capabilities for examining Linux system behavior.

BCC has played an important role in making eBPF practical for performance analysis and debugging.

For example, an engineer may use a BCC tool to investigate disk latency, CPU scheduling, network behavior, or process activity.

Developers can also build custom instrumentation using supported interfaces.

This flexibility makes BCC useful in environments where existing monitoring tools do not provide enough detail.

However, BCC is primarily a toolkit rather than a fully managed observability product.

Organizations must consider dependencies, privileges, deployment requirements, and the maintenance of custom scripts.

Key Features

  1. eBPF development toolkit: Supports creation of tracing programs.
  2. Prebuilt tracing tools: Includes utilities for common investigations.
  3. Performance analysis: Supports CPU, disk, and network diagnostics.
  4. System event monitoring: Observes supported kernel activities.
  5. Custom instrumentation: Enables specialized analysis.
  6. Programming interfaces: Supports development workflows using relevant languages.
  7. Linux troubleshooting: Helps diagnose operating system problems.
  8. Educational examples: Provides practical eBPF implementation references.
  9. Open-source ecosystem: Supports community development.

Benefits

BCC provides extensive flexibility for teams building or using custom Linux observability tools.

Pros

  • Open-source.
  • Rich tracing toolkit.
  • Flexible customization.
  • Useful performance diagnostics.
  • Strong educational value.
  • Broad Linux applicability.

Cons

  • Requires technical expertise.
  • Deployment dependencies.
  • Not a turnkey monitoring service.
  • Custom tool maintenance.
  • Kernel compatibility considerations.
  • Limited native enterprise reporting.

Use Cases

Linux performance engineering, custom tracing, infrastructure debugging, and eBPF development.

Best For: Systems engineers and developers building custom observability workflows.

9. Datadog eBPF-Based Network Monitoring

Short Description

Datadog provides commercial observability capabilities that use eBPF in selected network and system monitoring workflows.

Its Network Performance Monitoring offering can help organizations understand communication between services, hosts, and infrastructure components.

This is particularly useful in distributed environments where application behavior depends on many network connections.

For example, an SRE investigating increased application latency may need to determine whether the problem originates from network communication, service dependencies, or infrastructure performance.

Datadog can connect relevant network telemetry with other monitoring information available in its platform.

A major advantage is the ability to investigate selected infrastructure and application signals through a common observability environment.

However, Datadog is a broader commercial monitoring platform, not exclusively an eBPF tool.

Organizations should review which features use eBPF and how telemetry collection varies across supported operating systems.

Key Features

  1. Network Performance Monitoring: Provides visibility into supported network communication.
  2. eBPF-based collection: Uses eBPF for selected Linux network telemetry.
  3. Service dependency visibility: Helps identify communication relationships.
  4. Infrastructure correlation: Connects network information with other monitoring data.
  5. Dashboards: Provides visual analysis interfaces.
  6. Alerting: Supports monitoring conditions and operational notifications.
  7. Cloud integration: Works with supported cloud environments.
  8. Historical analysis: Supports investigation of retained monitoring information.
  9. Enterprise observability: Connects network data with broader platform capabilities.

Benefits

Datadog can reduce the need to operate separate monitoring systems for network and infrastructure analysis.

Its commercial platform is especially relevant to organizations seeking centralized dashboards and alerting.

Pros

  • Integrated observability platform.
  • Commercial support.
  • Useful network visibility.
  • Infrastructure correlation.
  • Managed dashboards and alerting.
  • Broad ecosystem integrations.

Cons

  • Subscription costs.
  • Pricing complexity.
  • eBPF use is feature-specific.
  • Data collection overhead.
  • Platform dependence.
  • Requires telemetry governance.

Use Cases

Enterprise network monitoring, service dependency analysis, infrastructure troubleshooting, and cloud operations.

Best For: Organizations seeking integrated commercial observability.

10. Grafana Beyla

Short Description

Grafana Beyla is an open-source eBPF-based application observability tool designed to provide selected application telemetry without requiring manual instrumentation of every service.

It is relevant to teams seeking application performance visibility through automatic instrumentation.

Beyla can generate supported telemetry that integrates with observability systems such as those using OpenTelemetry-compatible workflows.

For example, a platform team may deploy Beyla to obtain request metrics from supported services.

This can provide an initial view of application behavior before developers add more detailed instrumentation.

Beyla is particularly useful for reducing the effort required to establish basic service-level observability.

However, automatic eBPF instrumentation cannot capture every business transaction or application-specific operation.

Organizations may still need manual instrumentation for detailed traces, custom attributes, and domain-specific metrics.

Key Features

  1. eBPF-based instrumentation: Collects supported application telemetry.
  2. Automatic service discovery: Identifies selected application processes and services.
  3. Request metrics: Generates supported service performance measurements.
  4. OpenTelemetry integration: Supports compatible telemetry export workflows.
  5. Grafana ecosystem compatibility: Connects with relevant observability infrastructure.
  6. Reduced manual instrumentation: Helps establish baseline monitoring.
  7. Application latency visibility: Supports investigation of selected service behavior.
  8. Cloud-native deployment: Fits supported container and Kubernetes environments.
  9. Open-source architecture: Enables community-driven development.

Benefits

Beyla can help teams introduce application observability without immediately modifying every service.

It is useful for organizations beginning an instrumentation modernization effort.

Pros

  • Open-source.
  • Automatic instrumentation.
  • OpenTelemetry relevance.
  • Grafana ecosystem integration.
  • Useful baseline application metrics.
  • Reduced developer effort.

Cons

  • Protocol and runtime limitations.
  • Not a complete APM platform.
  • Detailed business traces may require instrumentation.
  • Kernel compatibility requirements.
  • Telemetry overhead must be evaluated.
  • Additional storage and visualization systems are needed.

Use Cases

Application performance monitoring, Kubernetes service metrics, automatic instrumentation, and OpenTelemetry adoption.

Best For: Platform teams seeking low-friction application observability.

eBPF Observability & Runtime Security Tools Comparison Table

ToolPrimary FunctionMain StrengthBest ForKey Limitation
CiliumNetworking and securityIdentity-aware network policyKubernetes networkingOperational complexity
HubbleNetwork observabilityKubernetes flow visibilityCilium usersDepends on Cilium
TetragonRuntime securityProcess monitoring and enforcementCloud security teamsPolicy complexity
FalcoRuntime threat detectionCustomizable detection rulesSecurity operationsAlert tuning
PixieApplication observabilityAutomatic Kubernetes telemetryDevelopers and SREsProtocol coverage
Inspektor GadgetSystem diagnosticsTargeted eBPF gadgetsPlatform engineersLimited centralized analytics
bpftraceLinux tracingFlexible scriptingPerformance engineersRequires expertise
BCCeBPF toolkitCustom instrumentationSystems developersNot turnkey
DatadogCommercial observabilityUnified monitoringEnterprisesSubscription costs
Grafana BeylaApplication instrumentationLow-friction service metricsPlatform teamsLimited deep application context

How to Choose eBPF Observability & Runtime Security Tools

1. Define the Primary Objective

Start by deciding whether the organization needs application observability, network monitoring, runtime threat detection, or kernel-level debugging.

These objectives overlap, but the tools are not interchangeable.

For example, Falco and Tetragon focus on runtime security, while Beyla and Pixie emphasize observability.

2. Review Operating System Compatibility

Most eBPF tooling depends on supported Linux kernel capabilities.

Check kernel versions, distribution support, container runtime requirements, and available privileges.

3. Evaluate Kubernetes Integration

Kubernetes-aware tools can associate events with pods, namespaces, services, and workloads.

This context is particularly useful in dynamic cloud-native environments.

4. Compare Telemetry Depth

Determine whether the tool provides network flows, system calls, process execution, request metrics, or detailed application traces.

Avoid assuming that all eBPF products expose the same information.

5. Measure Operational Overhead

Test CPU, memory, network, and storage impact under representative workloads.

The eBPF program itself may be efficient while downstream telemetry processing still creates substantial overhead.

6. Evaluate Security and Privileges

Kernel-level instrumentation can require elevated permissions.

Review the tool’s deployment architecture, access controls, and security boundaries.

7. Assess Alerting and Investigation Workflows

Security tools should integrate with incident response processes.

Observability tools should support dashboards, queries, and troubleshooting.

8. Review Data Retention

High-volume telemetry can create significant storage requirements.

Establish retention periods based on operational needs.

9. Test Failure Scenarios

Evaluate what happens when agents fail, kernel features are unavailable, or the telemetry backend becomes unreachable.

10. Consider Long-Term Maintenance

Open-source tools may require internal engineering resources, while commercial platforms introduce subscription and vendor dependencies.

Best eBPF Tools by User Type

User TypeRecommended ToolsWhy
Kubernetes platform engineerCilium, HubbleNetworking and flow visibility
Cloud security engineerTetragonRuntime monitoring and enforcement
SOC analystFalcoConfigurable security detections
Application developerPixieKubernetes application diagnostics
Site reliability engineerInspektor Gadget, bpftraceTargeted troubleshooting
Linux systems engineerBCCAdvanced tracing
Enterprise operations teamDatadogCentralized observability
OpenTelemetry platform teamGrafana BeylaAutomatic service telemetry
Network security administratorCiliumWorkload-aware network controls
DevSecOps teamFalco, TetragonRuntime threat visibility

Practical Example: Implementing eBPF Observability and Runtime Security in Kubernetes

Consider a SaaS company running microservices across multiple Kubernetes clusters.

The company experiences intermittent latency problems and wants to improve runtime threat detection.

Step 1: Define the Objectives

The platform team wants network flow visibility and application latency metrics.

The security team wants alerts for unexpected process execution and suspicious container activity.

Step 2: Review the Environment

Inventory Kubernetes versions, Linux distributions, kernel capabilities, container runtimes, and existing monitoring agents.

Step 3: Establish Baseline Metrics

Measure CPU utilization, memory usage, network throughput, and current telemetry costs.

Step 4: Select Networking and Observability Tools

Evaluate Cilium and Hubble for network visibility.

Consider Pixie or Grafana Beyla for supported application telemetry.

Step 5: Select Runtime Security Controls

Evaluate Falco or Tetragon based on detection requirements and enforcement needs.

Step 6: Deploy a Limited Pilot

Begin with a noncritical cluster or a small group of workloads.

Avoid deploying every tool across the entire environment immediately.

Step 7: Validate Network Visibility

Confirm that the platform can identify service communication and relevant network policy decisions.

Step 8: Validate Application Metrics

Generate test traffic and confirm that expected request metrics appear.

Step 9: Test Security Detections

Run authorized test scenarios involving unexpected process execution.

Verify that the security tool produces the expected events.

Step 10: Tune Rules and Collection

Reduce unnecessary telemetry and adjust detection rules to avoid excessive alerts.

Step 11: Measure Overhead

Compare resource consumption and application performance against the original baseline.

Step 12: Establish Operational Ownership

Assign responsibility for agent updates, policy changes, incident response, and telemetry retention.

Step 13: Expand Deployment

Roll out validated configurations across additional clusters.

Step 14: Review Results

Track detection quality, troubleshooting time, operational overhead, and monitoring coverage.

Common Challenges and Limitations

Kernel Compatibility

Different Linux kernels expose different eBPF capabilities.

A tool that works in one environment may require changes in another.

Elevated Privileges

Kernel instrumentation can require permissions that organizations must carefully control.

Telemetry Volume

Collecting too many events can overwhelm storage and analysis systems.

Incomplete Application Context

Kernel-level observations may not contain the business information required for detailed application troubleshooting.

Detection Noise

Runtime security tools can generate alerts for legitimate activity.

Rules must reflect actual workload behavior.

Operational Complexity

Running multiple agents may increase resource usage and administrative work.

Enforcement Risks

Incorrect runtime policies can block legitimate operations.

Frequently Asked Questions

1. What is eBPF?

eBPF is a technology that allows verified programs to execute at supported points within the Linux kernel and related environments.

2. What is eBPF observability?

It uses eBPF to collect information about system, network, and application behavior.

3. What is eBPF runtime security?

It uses supported eBPF capabilities to observe or help control security-relevant runtime activity.

4. Does eBPF replace application logs?

No. It complements logs, metrics, and traces.

5. Is eBPF only for Kubernetes?

No. Many eBPF tools operate directly on Linux systems.

6. Does eBPF work on Windows?

Linux eBPF capabilities are the primary foundation for most tools in this comparison. Windows has separate eBPF-related development efforts, but compatibility is not universal.

7. What is Cilium?

Cilium is an eBPF-based networking, security, and observability platform.

8. What is Hubble?

Hubble provides network observability within the Cilium ecosystem.

9. What is Tetragon?

Tetragon is an eBPF-based runtime security observability and enforcement project.

10. What is Falco?

Falco is a runtime security detection tool that supports eBPF-based event collection.

11. Can eBPF detect malware?

eBPF-based tools can detect selected suspicious behaviors, but they do not automatically identify every malicious program.

12. Does eBPF introduce overhead?

Yes. The amount depends on instrumentation, workload, and data processing.

13. Can eBPF monitor network traffic?

Yes, through supported networking instrumentation.

14. What is bpftrace?

bpftrace is a high-level tracing language and tool for Linux.

15. What is BCC?

BCC is a toolkit for creating and using eBPF-based tracing applications.

16. Can eBPF replace an APM platform?

Not entirely. eBPF can provide useful automatic telemetry, but detailed application monitoring may still require additional instrumentation.

17. Can eBPF enforce security policies?

Some tools support enforcement through appropriate kernel mechanisms.

18. Is eBPF secure?

The verifier and kernel security mechanisms provide important safeguards, but implementation quality, permissions, and kernel vulnerabilities remain relevant.

19. Which eBPF tool is best for Kubernetes?

Cilium, Hubble, Tetragon, Falco, Pixie, and Beyla address different Kubernetes networking, observability, and security needs.

20. Which eBPF tool is best overall?

There is no universal winner. The best choice depends on the organization’s primary objective, Linux environment, operational expertise, and required integrations.

Final Thoughts

eBPF has become an important foundation for modern Linux observability and cloud-native security.

Cilium and Hubble provide networking and communication visibility.

Tetragon and Falco focus on runtime security.

Pixie and Grafana Beyla support application observability.

Inspektor Gadget, bpftrace, and BCC provide flexible diagnostic capabilities.

Datadog offers integrated commercial monitoring with selected eBPF-based functionality.

Organizations should select tools based on the specific operational questions they need to answer.

A successful deployment combines compatible kernel infrastructure, focused telemetry collection, meaningful detection policies, careful performance testing, and clear operational ownership.

The objective is not to collect every possible kernel event. It is to turn relevant system activity into useful performance insights and actionable security decisions.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
0
Would love your thoughts, please comment.x
()
x